HENNGE Access Control : HENNGE One Directory Sync (Microsoft 365 with Azure Active Directory)

This guide consists of the instructions on how to correctly install the HENNGE One Access Control Directory Sync and ensure that it is working properly before proceeding to Single Sign-on setup. This guide contains the followings:

  1. Prerequisites of setting up HENNGE One Access Control Directory Sync
  2. HENNGE One Access Control Directory Sync setting

1) Prerequisites of setting up HENNGE One Access Control Directory Sync 

Note : These prerequisites are required for ONLY the PC used to perform the setup, NOT end user's PCs.

A Windows machine that is installed with:

1) PowerShell ver. 3.0 or above.

2) Azure Active Directory Module for Windows PowerShell

 - Azure Active Directory Module for Windows PowerShell (32-bit version)

 - Azure Active Directory Module for Windows PowerShell (64-bit version)

3) Microsoft Online Services Sign-In Assistant for IT Professionals

 - Microsoft Online Services Sign-In Assistant for IT Professionals BETA

After assuring that your Windows machine is installed with the requirements above, you may now proceed to the actual setup.

2) HENNGE One Access Control Directory Sync setting 

Step 1 - Log in to your Access Control Admin Console

https://ap.ssso.hdems.com/admin/yourdomain

Step 2 - Click "Domain Settings" in the left pane.

Screen_Shot_2016-02-16_at_19.36.41_rev.png

Step 3 - Click "Configure" in "HENNGE One Access Control Directory Sync Connection" field.

Screen_Shot_2016-02-16_at_19.37.35_rev.png

Step 4 - Click "Connect" button. 

Screen_Shot_2016-02-16_at_19.38.46_rev.png

Step 5 - Sign in to Microsoft 365 as "Global Admin" role, and accept "HENNGE One Access Control Directory Sync" app.

Screen_Shot_2016-02-16_at_19.49.16.png

Screen_Shot_2016-02-17_at_10.22.48_rev.png

Step 6 - After accepting, Powershell commands will be shown as below:

Screen_Shot_2016-02-17_at_10.45.22_rev.png

Step 7 - Run the commands above in Powershell.

Screen_Shot_2016-02-17_at_12.18.03.pngScreen_Shot_2016-02-17_at_12.23.58_rev.png

Step 8 - After executing these commands, inform us that you have completed the previous steps and we will proceed to the remaining processes to complete the synchronisation.

          
Was this article helpful?