[Device Certificate] Issuing a Device Certificate

Description

This article explains the procedure for admins to issue device certificates from the Administration when using Device Certificates with Access Control. You can check both the direct entry and bulk registration using a template, as well as the details of each input field.

Notes

1. The content of this article is based on product specifications as of July 2026 and may change without notice.
2. To view the actual screens or change settings, Access Control global admin privileges or Device Certificate admin privileges are required.
3. For instructions on how to access the Administration, please refer to the following article.
   [Access Control] How to Log in to the Administration
4. If you want to change the content of the email sent to users when issuing device certificates, please refer to the following article.
   [Access Control] Device Certificate Settings

Procedure

1. In the Access Control Administration, go to the left menu and select [Certificate] - [Device Certificates].

   

2. Click [+ Register Certificate].

   

3. Enter the required information for issuing the certificate.
   The maximum number of certificates you can issue at one time is limited by your contracted number of device certificates.
   If you try to register more than the limit, a warning will be displayed on the certificate registration screen.

When entering directly

Enter the required information for certificate registration in each input field according to the table in Step 4. (※ ①)

When registering in bulk using a template

1. Select [Device Certificate Registration List] to download the template. (※ ②)
2. Fill in the required information in the file according to the table in Step 4.
   Then, upload the file using [Drag & Drop or Select File]. (※ ③)
   * Please create the file using UTF-8 character encoding.
   * Supported upload formats are XLS, XLSX, CSV, or TSV.
   * If an error occurs and some certificates are not registered, select [Download List of Unregistered Certificates (CSV)] to download the list of unregistered certificates as a CSV file.
   If you edit and re-upload this list, only the unregistered certificates will be extracted and re-registered. (※ ④)

4. Fill in each column on the certificate registration screen or in the template file according to the table below.
   * Enter one row for each device certificate to be issued.
   * If you are issuing multiple device certificates at once, enter as many rows as the number of certificates to be issued.

For some fields, the field names and input values differ depending on whether you enter them directly on the screen or use a file.
They are listed as [For screen input / For file entry].

5. Check that there are no errors in the information entered for certificate issuance.
   Make sure the status to the left of each certificate registration row is not Error.
   If you enable [Show only rows with errors], only the error rows will be displayed.

   

6. Click [Register X Certificates].
   * When you click the button, an email for certificate installation will be sent to the "Installation Email" address.

   

7. In the Access Control Administration, go to the left menu [Log Management] and select [Device Cert Operations] to confirm that a "Registration" row appears in the device certificate operation status.
   Immediately after registering the certificate, the "Status" will show as "Processing".
   When the email is sent to the "Installation Email", the "Status" will change to "Completed".

   

Reference

[Device Certificate] How to Check Issued Device Certificates

Translation Disclaimer

This article has been automatically translated from the original Japanese version for your convenience.
While we strive to ensure accuracy, we cannot guarantee its reliability or completeness.

In the event of any discrepancies or questions regarding the content, the official Japanese version shall prevail.