Target
Intended for administrators of HENNGE Access Control.
Purpose
To check the details of HENNGE Device Certificate as an administrator.
Notes
- The content of this article is based on the product specifications as of August 2024 and may change without notice.
- Administrator privileges of HENNGE Access Control are required for actual screen verification and configuration changes.
- Refer to the following article for how to access the admin console:
Accessing HENNGE Access Control admin console
Procedure
1. Click on the [Device Certificates] - [Certificates] from the left menu in the HENNGE Access Control management screen.
2. On the [Certificates] screen, search for the target HENNGE Device Certificate and select it.
3. Details of HENNGE Device Certificate will be displayed.
Items
Certificate
- Login type: Indicates the specified login type.
- Email Subject Note: Email subject specified at the time of certificate issuance
- Description: Displays the memo specified at the time of issuance.
* This memo can be updated even after the certificate is issued. - Certificate ID: Shows the Certificate ID.
- Status: Displays the status of HENNGE Device Certificate.
- Non-Downloaded: Indicates the pending state immediately after issuance.
- Downloaded: Indicates the state where the certificate has been downloaded.
- In Use: Indicates the state where the certificate has been used for authentication at least once.
- Expiring Soon: Indicates the state one month before the expiration date, allowing the use of the renewal function.
- Updated: Indicates a certificate that has been updated using the renewal function.
- Update Failed: Indicates a certificate that attempted to be updated using the renewal function but failed for some reason.
- Set as Expiring: Indicates that the certificate is waiting for replacement of an old device using the manual expiration function.
- Expired: Indicates the expired state.
- Revoked: Indicates the revoked state.
- Valid from: Displays the date and time when the HENNGE Device Certificate was issued.
- Valid until: Displays the expiration date of the HENNGE Device Certificate.
User
- Username: Displays the username specified at the time of issuance.
- Installation email: Displays the specified destination email address.
- Last used: Displays the date and time when the HENNGE Device Certificate was last used.
Renewability
- Renewability: Displays the update status using the renewal function.
- Renewable: In a state where updating is possible. Additional status information for renewal function usage will be displayed.
- Standard Update: Indicates updating for devices other than Android terminals.
- Identifier-input Update: Indicates updating for Android terminals.
- Updating: In the process of updating.
- Update Error: Indicates an error during the update.
- Non Renewable: Indicates a state where updating is not possible.
* For information on HENNGE Device Certificate renewal function, refer to the following page:
HENNGE Device Certificate Device Certificate Renewal Function Overview
Device
- OS: Displays the OS of the device specified at the time of issuance.
- Certificate Information: Displays certificate information.
- Device ID Type: Device ID: Displays the device ID type specified at the time of issuance and the device ID (MAC address / IMEI / UDID, etc.).
- Language: Displays the language specified at the time of issuance.
- Password: Displays the password of HENNGE Device Certificate.
※ Displayed only if the bulk download function is enabled.