[Secure Transfer] Google Workspace Group Restriction Pre-Configuration Tasks

Overview

This article describes the prerequisite configuration Procedure for using Secure Transfer with Google Workspace and restricting users by Google Workspace groups. You will configure an API client in the Google Workspace Admin Console.

Notes

1. If you are using Access Control, this configuration is not required.
2. This article has been created based on the product specifications as of July 2026 and is subject to change without notice.

Procedure

Configuring the API Client

1. Access the [Google Workspace Admin Console] using a Google Workspace Super Admin account.

   https://admin.google.com/

2. From the menu on the left side of the screen, navigate to [Security] - [Overview].
3. Navigate to [API controls].
4. Navigate to [Domain-wide delegation] - [Manage domain-wide delegation].
5. Click [Add new].
6. Enter the following Value and click [Authorize].

   ・[Client ID]: 116466841853415884993
   ・[OAuth Scopes (comma-delimited)]: https://www.googleapis.com/auth/admin.directory.group.readonly

7. Verify that the information for the added API client is displayed on the screen.

Next Steps

For the Procedure on Google Workspace group login restrictions, refer to the following article.
[Secure Transfer] Configuring Google Groups login restrictions

Translation Disclaimer

This article has been automatically translated from the original Japanese version for your convenience.
While we strive to ensure accuracy, we cannot guarantee its reliability or completeness.

In the event of any discrepancies or questions regarding the content, the official Japanese version shall prevail.