Description
This article explains the procedure for Admins to issue a device authentication QR code in order to register Secure Browser.
Notes
- The content of this article is based on product specifications as of April 2026 and may be subject to change without notice.
- To view actual screens or make configuration changes, Access Control global admin privileges or Secure Browser admin privileges are required.
- For instructions on how to access the Administration, please refer to the following article.
How to Access the Access Control Administration
Procedure
How to Register Secure Browser
-
In the Access Control Administration, go to the left menu and select [Secure Browser] – [Devices].
-
Click [Add Device].
-
Enter the Access Control username of the user who will use Secure Browser, then click [Confirm].
-
A QR code will be displayed.
Scan the QR code from the device that will use Secure Browser.
How to Authenticate Secure Browser Device
The procedure differs depending on the OS of the device to be installed.
For application installation and initial setup after installation, please refer to the following article.
Installing Secure Browser
How to Approve Secure Browser Device Authentication
This is required if manual device authentication is configured.
For information on how to configure and approve device authentication, please refer to the following article.
Secure Browser Device Authentication