Target
The administrators responsible for the initial setup and operational management of HENNGE File DLP are the intended audience of this article.
Purpose
This article explains the procedure for activating the file sharing auto-stop rule.
Precautions
1. The content of this article is based on the product specifications as of July 2024 and may be subject to change without prior notice.
2. Actual screen verification and setting changes require HENNGE File DLP administrator privileges.
3. When activating the Auto Remediation Policy, files may be displayed on the "Pending Stop" tab on the screen. Please check the contents carefully, as the files listed in this tab will have their sharing stopped according to the set rules once the rule is activated.
Detailed Step-by-Step Instructions
1. Access the HENNGE File DLP management screen.
For instructions on how to access the management screen, please refer to the following article.
How to Access the HENNGE File DLP Management Screen
2. From the menu on the left side of the screen, click [ Risk ] - [ Auto Remediation Policies ].
3. Click on the service name.
4. Click on the policy name you want to activate.
5. Click [ Edit Policy ] at the top right of the screen.
※ Ensure that the files pending stop are as expected before activating.
6. Click [ Edit Policy ] at the top right of the screen.
7. Click the toggle button for [ Enable Rule ] under [ General Settings ].
8. Click [ Update Rule ] at the bottom of the screen.