(Full Manual) HDE Secure Transfer Standalone Initial Setup

This manual will guide you on how to setup HDE Secure Transfer Standalone version:

1) Add Users
2) (Optional) Reset Password

1) Add Users 

☆ 1 - Log in to Admin Console

https://ap.ssso.hdems.com/admin/yourdomain

20.png

☆ 2 - Go "Users" menu

2__1_.png

☆ 3 - Click on the "+ New User" button

3__1_.png

☆ 4 - In the "Add New User" window, fill in the user information and click "+ Add".

***Note: By default, the Password Change Policy will be set as "Force password change", leave this option be if you wish for the end-user to set the password on their own during their initial login.

Untitled.png

(Optional) Add multiple users at once

 Please refer to this article: How to add multiple users at once?

 

☆ 5 - Go to "Access Policy Group" menu => click on the pencil icon as shown below.

Untitled.png

☆ 6 - A window for editing Access Policy Group will show up. Scroll to the bottom of the window and check on "HDE Secure Transfer" box. Then click "Submit".

Untitled.png

☆ 7 - The setup has been completed successfully. Please provide end-users with the following information.

1) Username/Initial Password
2) HDE Secure Transfer service URL       => https://upload.hdedrive.com/ui/yourdomain.com

 

2) (Optional) Reset Password

☆ 1 - To reset the password for the user, go to Admin Console

https://ap.ssso.hdems.com/admin/yourdomain

☆ 2 - Go to "Users" menu => click on the Lock icon to "Change Password"

Untitled.png

☆ 3 - The Change Password window will be displayed. Input the new password here. If you wish for the end-user to set the password on their own after logging in successfully, click on the "Force password change" option.

Untitled.png

          
Was this article helpful?

Frequently Asked Questions (FAQs)

Powered by Zendesk