Target
This article applies to administrators who perform the initial setup of HENNGE Email DLP or operational management.
Purpose
This article describes how to set Automatic Address Pruning on Hennge Email DLP.
Cautions
1. The content of this article is based on product specifications as of December 2021 and is revised accordingly without advanced notice.
2. HENNGE Email DLP administrator authority is required to view the actual screen and change settings.
Please refer to the following article for details on how to set up an administrator.
Setup/Change the Administrator
3. For the URL and login information for the HENNGE Email DLP administration page, please refer to the login information sent by email.
Procedure
Notification for Filter-related settings can be found by logging into HENNGE Email DLP with an administrator account. Click [Filter] - [Automatic Address Pruning] on the left menu.
Overview
When this function is enabled, If addresses exceed the threshold value:
1. Addresses of domains other than the excluded domains listed in the header are removed from the header
2. Only the recipient and the addresses of the excluded domains are displayed on the recipient's side.
Note that when this feature is enabled, it will be effective for the entire tenant, not for control on a rule-by-rule basis.
Steps
1. Select [Active], fill out [Address threshold] and [Excluded domains], and click [Apply].
・Address threshold : Enter a number greater than or equal to 2.
・Excluded domains : There must be at least one excluded domain for this feature to be activated.
To enter multiple excluded domains, enter each domain on a separate line, starting with a new line for each domain.