List of Procedures for Introducing HENNGE Device Certificate

Target

This document is intended for customers who are starting to use the HENNGE Device Certificate. 

Purpose

This document explains the list of tasks required to start using the HENNGE Device Certificate.

Notes

1. Please check the necessary items according to the services and usage purposes you are using.

2. The content of this article is based on the product specifications as of May 2024 and may be subject to change without notice.

Table of Contents

1. Preparation

1.1. Device Information Gathering

1.2. Checking Exchange Online Modern Authentication Status

2. Issuing HENNGE Device Certificate

2.1. Issuing HENNGE Device Certificate

3. Install the HENNGE Device Certificate

3.1. Install the HENNGE Device Certificate

3.2. Check the Installation Status of the HENNGE Device Certificate

3.3. Install the Application to Load the HENNGE Device Certificate (iOS Devices)

4. Start Access Control

4.1. Login Screen Settings

4.2. Set/Assign Access Policy Groups

1. Preparation

1.1. Device Information Gathering

Collect information on the devices where the HENNGE Device Certificate will be installed.

1.2. Checking Exchange Online Modern Authentication Status

* This item should only be performed by customers using Microsoft 365.

2. Issue the HENNGE Device Certificate

2.1. Issuing HENNGE Device Certificate

Based on the collected device information, issue the HENNGE Device Certificate from the HENNGE Access Control management screen.

3. Install the HENNGE Device Certificate

3.1. Install the HENNGE Device Certificate

Install the HENNGE Device Certificate issued by the administrator on each device.

3.2. Check the Installation Status of the HENNGE Device Certificate

Confirm on each device that the HENNGE Device Certificate has been installed correctly.

3.3. Install the Application to Load the HENNGE Device Certificate (iOS Devices)

The necessary application varies depending on the services linked with HENNGE Access Control.
Please consult the relevant implementation guide for details.

Install the HENNGE Lock Application

Using Microsoft Applications with HENNGE Device Certificate [iPhone]

4. Start Access Control

4.1. Login Screen Settings

Display the authentication button for HENNGE Device Certificate on the login screen of HENNGE Access Control.
The login screen settings cannot be individually set for some users; they apply to all users.

4.2. Set/Assign Access Policy Groups

To control HENNGE Device Certificate, create/edit access policy groups.
Refer to the following article for how to edit access policy groups.

Editing Access Policy Groups

For an explanation of each item in the access policy group and how to write control formulas, refer to the following article.

Create a New Access Policy Group

If you create a new access policy group, follow the steps in the following article to assign the access policy group.

Assign Access Policy Groups to Users

          
Was this article helpful?