[Mesh Network] Editing a Subnet Linker

Overview

• This article explains how Mesh Network administrators can edit the subnet linker configuration.
  For an overview and the role of subnet linkers, please refer to the following service overview.
  [Mesh Network] Service Overview

Notes

1. Mesh Network administrator privileges are required to view the actual screens and change settings.
2. When logging in for the first time, only the initial administrator can log in to Mesh Network.
3. The content of this article is based on product specifications as of October 2026 and may be changed without notice thereafter.
4. The following Targets can be configured as subnet linkers:
   • Windows Server (resources with the CLI installed)
   • Linux Server (resources with the CLI installed)
   • Windows PC (devices with the client installed)
   • macOS (devices with the client installed)

Table of Contents

• Change the subnet linker name
• Add an advertised route
• Change an advertised route
• Delete an advertised route
• Disassociate a subnet linker
• Associate a subnet linker

Procedure

Change the subnet linker name

1. After logging in to the Mesh Network administration console, go to ［Linkers］－［Subnet Linkers］.
   [Mesh Network] How to Log In to the Administration Console
   
2. Click the three-dot menu “…” in the subnet linker row you want to edit, then click ［Edit Name］.
   
3. Change the subnet linker name and click ［Save］ to complete the name change.
   

Add an advertised route

1. After logging in to the Mesh Network administration console, go to ［Linkers］－［Subnet Linkers］.
   [Mesh Network] How to Log In to the Administration Console
   
2. Click the three-dot menu “…” in the subnet linker row you want to edit, then click ［Edit Advertised Routes］.
   
3. Click ［Add Route］.
   
4. Enter the IP address (range) and prefix you want to add, then click ［Save］ to complete the process.
   

Change an advertised route

1. After logging in to the Mesh Network administration console, navigate to ［Linkers］－［Subnet Linkers］.
   [Mesh Network] How to Log In to the Administration Console
   
2. Click the ellipsis “…” in the subnet linker row you want to edit, then click ［Edit Advertised Routes］.
   
3. Edit the route information you want to change, then click ［Save］ to complete the process.
   

Delete an advertised route

1. After logging in to the Mesh Network administration console, navigate to ［Linkers］－［Subnet Linkers］.
   [Mesh Network] How to Log In to the Administration Console
   
2. Click the ellipsis “…” in the subnet linker row you want to edit, then click ［Edit Advertised Routes］.
   
3. Click ［×］ next to the IP address (range) you want to delete, then click ［Save］ to complete the process.
   

Disassociate a subnet linker

1. After logging in to the Mesh Network administration console, navigate to ［Linkers］－［Subnet Linkers］.
   [Mesh Network] How to Log In to the Administration Console
   
2. To check the current association, click the subnet linker name.
   
   You can check the associated resource and device information in the ［Host］ section.
   
3. Close the details screen, then click ［Disassociate Node］ for the applicable subnet linker from the list screen.
   
4. Click ［Disassociate］ to complete the process.
   

Associate a subnet linker

1. After logging in to the Mesh Network administration console, navigate to ［Linkers］－［Subnet Linkers］.
   [Mesh Network] How to Log In to the Administration Console
   
2. Click ［Associate Node］ for the subnet linker with which you want to associate a resource or device.
   
3. Select the resource or device to associate, then click ［Next］.
   
4. Click ［Connect］ to complete the process.
   

Translation Disclaimer

This article has been automatically translated from the original Japanese version for your convenience.
While we strive to ensure accuracy, we cannot guarantee its reliability or completeness.

In the event of any discrepancies or questions regarding the content, the official Japanese version shall prevail.