YAML File Import Errors

Question

I received an error when importing a yml file via HENNGE Email DLP Admin Console. Can you tell me what is the cause of the error?

Answer

1) Syntax Error

Screen_Shot_2022-11-09_at_14.29.42.png


If you get the above "Syntax Error" message on the console, the import file format is not correct and the file cannot be loaded by the system. We recommend you to export a yml file from the current settings by the "Export" function and try correcting the import file based on the exported yml file format. 
(Reference)
How to Export Configurations Data?

 

2) Error Reports

If you get an error report, you can check the following table to know what the error report says. Please correct the errors indicated in the report and try importing the file again. If you are not sure what is the cause of the errors, please contact to a HENNGE Customer Success Guide.

Identifier Details
location

 Where the error is occurring
* The number indicated in "[]" counts up from zero. 

violation Please refer to the "3)Error List" section for the error reasons.
actual_value The value received by the system based on reading the imported yaml file.
snippet Snippet surrounding the location of error.

 

[Error Report Example] Suspension duration is wrongly specified for approval request action.
==========================================================

[1]
location: $.rule_groups[0].rules[0].action.type
violation: chkattrfield
actual_value: request_approval
snippet:
--------------------------------------------------------------
5 | - priority: 100
6 | name: test approval
7 | action:
> 8 | type: request_approval
^
9 | attribute:
10 | auto_release: true
11 | duration: 10m
12 |
--------------------------------------------------------------

==========================================================

 

3)Error List

- General ※ This error could occur for all YAML files.

required A required field is missing any input.
ieversion There is an error in the version section. Do not change the value of "version: 1".
min The minimum value that can be set is not met. Please review the value.
max The maximum value that can be set is exceeded. Please review the value.
unique Duplicates are occurring. Please review the value.

 

- Address Groups

name_reserved_by_system "All" cannot be used in the address group name. Please change it to another name.
email_or_domain

There is an error in the format of the address. Please fill in the format by email address, domain, and subdomain.
ex. sample@test.com、@test.com、.test.com

not_asterisk You cannot use "*" (wildcard). Please specify email address, domain, and subdomain in the format.
ex. sample@test.com、@test.com、.test.com
duplicate_address_in_address_group There are duplicate addresses in a single address group. Please review the addresses.
duplicate_address_group_name There are duplicate address group names. Please change it to another name.

 

- Rule Groups

eq There is an error in the setting value. Please review the setting value.
msgsz Message size must be between 1 to 2147483647 (2097152KB).
chkattrfield

There is a parameter that is not available for the specified action or there is a missing parameter.

notiftype The "Notify" setting is incorrect.
checkAttachmentOption The "attachment" setting is incorrect.
chktargetfield

The "target" setting is incorrect.

chkpredfield The "condition" setting is incorrect.
chkpatfield The "pattern" setting is incorrect.
chkcntfield The "count" setting is incorrect.
unknown_address_group_name The address group specified in "pattern" does not exist.

 

- Filter

unknown_address_group_name The specified address group name does not exist. Please check if the address group exists or if the group name is correct.
unknown_rule_group_name The specified rule group name does not exist. Please check if the rule group exists or if the group name is correct.

 

- Encryption Type

encryption_cfg_name_reserved "Don't Encrypt" cannot be used as the encryption type name. Please change to another name.
valid_encryption_type The "Password Type" setting is incorrect.
valid_random_password_per_encryption_type Invalid value is specified that cannot be specified in the "Fixed Password".
valid_fixed_password_format_per_encryption_type Invalid value is specified that cannot be specified in the "Random Password".
not_required_notify_recipient_type_never "Notify Recipient" cannot be set when "Fixed Password" is specified.
not_required_notification_template_id_for_encrypt_type "Notify Recipient Template ID" cannot be specified when "Fixed Password" is selected.
valid_filename_encoding The "Filename Encoding" setting is incorrect.
valid_filename The "ZIP Filename" setting is incorrect.
notify_template_not_exist There is an error in the "Notify Recipient Template ID".
valid_extension The setting value for "Exclude Extensions" is incorrect.

 

- Encryption Policies

unknown_address_group_name The specified address group name does not exist. Please check if the address group exists or if the group name is correct.
unknown_encryption_config_name The specified encryption type name does not exist. Please check if the encryption type exists or if the type name is correct.

 

          
這篇文章對您有幫助嗎?

常見問題