[Access Control] Assigning Access Policy Groups to Users

Overview

• This article explains the Procedure for administrators using Access Control to assign access policy groups to users.

Notes

1. The content of this article is based on product specifications as of October 2025 and may be changed without prior notice.
2. Global administrator privileges for Access Control are required to verify the screens and modify settings.
3. For information on how to access the Administration, please refer to the following article.
   [Access Control] How to Log in to the Administration
4. You must create an access policy group in advance by following the Procedure below.
   [Access Control] Creating/Editing Access Policy Groups

Procedure

There are two ways to assign access policy groups: assigning them individually to each user or assigning them in bulk.

Procedure for Assigning a Policy to Each User

1. In the Access Control Administration, navigate to [Users] - [User List].

   

2. Select the Target user.

   

3. Under [Access Policy Group], select one of the access policy groups that you have created, and then click [Apply Changes].

   

4. Confirm that the intended access policy group has been assigned.

   

Bulk Assignment

To register, update, or delete users in bulk, please refer to the following Procedure.
Bulk User Registration/Update/Deletion (Modern View)

Translation Disclaimer

This article has been automatically translated from the original Japanese version for your convenience.
While we strive to ensure accuracy, we cannot guarantee its reliability or completeness.

In the event of any discrepancies or questions regarding the content, the official Japanese version shall prevail.