Overview
This article explains how Users of Access Control can log in to the User Portal, set up their Password, and configure OTP (One-Time Password).
Notes
- The screen display may differ depending on the OS, version, and model of the Device you are using.
- The content of this article is based on product specifications as of September 2026 and may change without notice.
-
Some menus may not be displayed depending on your organization's Configuration.
If the required menu is not displayed, please contact your organization's Admin.
Procedure
Click the Procedure you want to perform.
How to log in using the new login screen
-
Log in to Access Control from the URL below.
https://ap.ssso.hdems.com
※For a detailed login image, please refer to the following article.
[Access Control] Login Image Using the New Login Screen -
After Login, you will be redirected to the User Portal.
How to log in using the old login screen
-
Log in to Access Control from the URL below.https://ap.ssso.hdems.com/portal/<yourdomain>/login/
※Please replace <yourdomain> with your contracted domain. -
After Login, you will be redirected to the User Portal.
Change Password
-
Click ［Password setup］.
-
Enter your Current Password, New Password, and New Password (Confirm), then click ［Send］.
※For Users with Password Synced from Active Directory, “Password can not be changed on HENNGE One.” is displayed.
In this case, change the Password for the applicable User in Active Directory.
Password Reset Email registration
-
Enter the New Password Reset Email and New Password Reset Email (Confirm), then click ［Send］.
-
An Email containing a Security code will be sent to the configured Password Reset Email.
Enter it in the ［Security code］ field. -
When Configuration is complete, the screen below is displayed.
-
If a Password Reset Email is already Set, delete it first.
After that, you can configure it again using the same Procedure.
OTP (One-Time Password) Configuration
Secure Browser Configuration
-
In the User Portal, click ［Username］－［Secure Browser Configuration］.
-
The currently registered Devices are displayed.
※ You can register a new Device by clicking ［Register New Device］ in the lower-left corner. -
When you click ［Register New Device］, a QR code for configuration is displayed, allowing you to configure a new Device.
-
After completing the configuration, click ［Configuration］ for each Device to configure Unread Email notifications.
Checking Device Certificates
-
In the User Portal, click ［Username］－［Device Certificates］.
-
You can check the Status of issued Certificates.
-
Click ［View］ to check detailed information for each Certificate.
Translation Disclaimer
This article has been automatically translated from the original Japanese version for your convenience.
While we strive to ensure accuracy, we cannot guarantee its reliability or completeness.
In the event of any discrepancies or questions regarding the content, the official Japanese version shall prevail.